GC1K Truck


REAR CARGO RACK

If you're looking to add extra space to your Intimidator UTV, here it is. The Intimidator Rear Cargo Rack allows the rider to carry extras to and from the stand, as well as tools on the farm. Bad Dawg's Rear Cargo Rack is made for the Intimidator UTV and allows the rider to carry the extras needed whether it's coolers, hunting supplies, or deer feed. This all-welded, solid steel construction has 3/4" tubes that mount on the back of the cab.

Models: 2014-Current Classic, GC1K, and Truck Series (no Crews)

Part #: 793-1016-00

2018-2019 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than by adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Brake Light Jumper
  • Harness

Models: 2018-2019 GC1K Single Cab, Crew, and Truck

Part #: 686-0099-00

2020 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Tail Light Upgrade

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2020 GC1K, GC1K Crew, GC1K Truck

Part #: 686-0098-00

GCK1 DOT WINDSHIELD

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA

Models: all GC1K models

Part #: 793-1101-00

GC1K HOOD MOUNTED LIGHT BAR ASSEMBLY

If you're doing any night riding or just need more lighting, this is the light bar for you. All items for mounting are included.

FEATURES: 
  • 60 watt 14" Bad Dawg light bar
  • 6,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Models: all GC1Ks

Part #: 693-3415-00

GCK1 FRONT FULL LEXAN WINDSHEILD

Putting a windshield on your Intimidator is a great investment. Being free of dust, bugs and flying debris will make your ride a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more enjoyable rides in their UTV? With Bad Dawg’s easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

FEATURES:

  • Made from 1/4" thick Lexan polycarbonate
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: all GC1Ks

Part #: 793-1100-00

SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

GC1K VERTICAL LIGHT BAR SWITCH

GC1K Vertical Light Bar Switch

Models: All

Part # 786-2056-00

Dimensions: 1.710" L x .860 W

UNDER-SEAT STORAGE COMPARTMENT

Looking for a little extra storage space on your Intimidator? This under-seat storage tray is just what you need. The thermoplastic tray is made of the highest quality and is able to withstand extreme temperature conditions and will not crack in cold weather. Installation is simple: just drop it in, line it up, and install a couple of screws (included), and you're good to go!

Models: Intimidator Crew and Truck (will not fit Classic or any GC1Ks)

Part #: 793-1051-00

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
GC1K STAGE 1 BUMPER UPGRADE

Upgrade from the Base model bumper to the GC1K Stage 1 Bumper. This adds a 2" front receiver hitch and will make your GC1K Base bumper ready.

Models: GC1K and GC1K Crew Base only

Part # 793-1126-00

GC1K STAGE 2 BUMPER UPGRADE

This upgrades your GC1K Stage 1 bumper to a GC1K Stage 2. This feature adds a cool look and a larger bar to protect the grill area.

Models: GC1K and GC1K Crew

Part # 793-1124-00


Notes: Must have GC1K Stage 1 bumper. 

GC1K STAGE 3 BUMPER UPGRADE

Upgrade your GC1K Stage 2 bumper to the GC1K Stage 3. This upgrade adds the hoops that protect the headlight area.

Models: GC1K and GC1K Crew

Part # 793-1122-00

Notes: Must have the GC1K Stage 2 bumper for this to work. 

WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

GC1K FRONT BUMPER

Bad Dawg Accessories takes pride in building the toughest and best-looking bumpers on the market. All of our bumpers are built in our own facility with the highest regard for quality and design features.

FEATURES:

  • Your factory winch mount will be used with this bumper.
  • Replaces your stock front brush guard.
  • Easy, bolt up installation (no drilling or cutting required).
  • Made from heavy-duty 2"x2" square tubing along with .125" steel for added extra protection.
  • Hand welded in our own facility.
  • Texture black powder-coated for superior protection.
  • Laser-cut and formed to ensure a great fit.
  • Made in Batesville, Arkansas

Models: 2018-Current GC1K Stage 2 & 3

Part # 793-1108-00

CREW UTV COVER

Protect your UTV from the elements! More than any other vehicle your UTV is subjected to all kinds of rain, snow, ice, dirt, and more. Preserve your machine's plastics and parts with this top quality cover.

FEATURES:
  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all crew cabs

Part #: 793-6004-00

Dimensions: 160" L x 64" W x 80" H

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

UNIVERSAL ROOF CARGO RACK

Looking to keep extra cargo and riding gear or maybe even your coolers stored away while out riding the trails? If so, then you are guaranteed to get what you ask for with this adjustable roof cargo rack. Made from solid American steel and black powder-coated, it's built to last.

Models: all

Part #: 793-1041-00

Dimensions: 33" L x 51-59" W x 5" H

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

INTIMIDATOR CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

GC1K FRONT FOLDING WINDSHIELD

Add a little versatility to your Intimidator GC1K with our folding windshield. This unit was engineered to stand the test. Keep the wind, rain, and dust from coming in the front of your GC1K. Made from 1/4" thick polycarbonate with a clear strip hinge that does not affect the driver's view.

FEATURES:

  • The bottom has a gasket to protect the body of your unit
  • The hood compartment is still accessible.
  • Includes all hardware and instructions
  • The windshield is compatible with any GC1K roof

Models: all GC1Ks

Part #: 793-1107-00

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

INTIMIDATOR QUICK CONNECT PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Classic Series and Truck Series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This one piece roof includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current Intimidator Classic, GC1K and Truck Series

Part #: 793-1102-00

INTIMIDATOR LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

LIGHT BAR/ MOUNT ASSEMBLY FOR THE GC1K FRONT FOLDING WINDSHIELD

When you already have your windshield and aluminum top installed, but decide you want to also have a light bar this is what you need. This assembly kit mounts the 30" light bar directly underneath the roof since this is used with the aluminum roof, it can not be mounted on top.

FEATURES:

  • 120 Watts
  • Up to 13,0000 Lumens
  • Custom Optical Lens
  • Mounting Brackets
  • Hardware Included
  • 30" Horizontal Light Bar
  • Black Extruded Aluminum
  • Harness

Notes: This kit only works with aluminum tops and does not include windshield or top

Models: all GC1Ks - with aluminum top only

Part #: 693-3414-00

Dimensions: 61" L x 25" x 9" H

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

 


GC1K Crew


2018-2019 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than by adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Brake Light Jumper
  • Harness

Models: 2018-2019 GC1K Single Cab, Crew, and Truck

Part #: 686-0099-00

2020 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Tail Light Upgrade

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2020 GC1K, GC1K Crew, GC1K Truck

Part #: 686-0098-00

GCK1 DOT WINDSHIELD

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA

Notes: Product is shipped freight. Please inspect the product carefully before signing and accepting the shipment. Once the product has been signed for, we are no longer liable for damages incurred during shipping. 

Models: all GC1K models

Part #: 793-1101-00

GC1K HOOD MOUNTED LIGHT BAR ASSEMBLY

If you're doing any night riding or just need more lighting, this is the light bar for you. All items for mounting are included.

FEATURES: 
  • 60 watt 14" Bad Dawg light bar
  • 6,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Models: all GC1Ks

Part #: 693-3415-00

GCK1 FRONT FULL LEXAN WINDSHEILD

Putting a windshield on your Intimidator is a great investment. Being free of dust, bugs and flying debris will make your ride a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more enjoyable rides in their UTV? With Bad Dawg’s easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

FEATURES:

  • Made from 1/4" thick Lexan polycarbonate
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: all GC1Ks

Part #: 793-1100-00

GC1K VERTICAL LIGHT BAR SWITCH

GC1K Vertical Light Bar Switch

Models: All

Part # 786-2056-00

Dimensions: 1.710" L x .860 W

SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

UNDER-SEAT STORAGE COMPARTMENT

Looking for a little extra storage space on your Intimidator? This under-seat storage tray is just what you need. The thermoplastic tray is made of the highest quality and is able to withstand extreme temperature conditions and will not crack in cold weather. Installation is simple: just drop it in, line it up, and install a couple of screws (included), and you're good to go!

Models: Intimidator Crew and Truck (will not fit Classic or any GC1Ks)

Part #: 793-1051-00

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
GC1K STAGE 1 BUMPER UPGRADE

Upgrade from the Base model bumper to the GC1K Stage 1 Bumper. This adds a 2" front receiver hitch and will make your GC1K Base bumper ready.

Models: GC1K and GC1K Crew Base only

Part # 793-1126-00

GC1K STAGE 2 BUMPER UPGRADE

This upgrades your GC1K Stage 1 bumper to a GC1K Stage 2. This feature adds a cool look and a larger bar to protect the grill area.

Models: GC1K and GC1K Crew

Part # 793-1124-00


Notes: Must have GC1K Stage 1 bumper. 

GC1K STAGE 3 BUMPER UPGRADE

Upgrade your GC1K Stage 2 bumper to the GC1K Stage 3. This upgrade adds the hoops that protect the headlight area.

Models: GC1K and GC1K Crew

Part # 793-1122-00

Notes: Must have the GC1K Stage 2 bumper for this to work. 

WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

GC1K FRONT BUMPER

Bad Dawg Accessories takes pride in building the toughest and best-looking bumpers on the market. All of our bumpers are built in our own facility with the highest regard for quality and design features.

FEATURES:

  • Your factory winch mount will be used with this bumper.
  • Replaces your stock front brush guard.
  • Easy, bolt up installation (no drilling or cutting required).
  • Made from heavy-duty 2"x2" square tubing along with .125" steel for added extra protection.
  • Hand welded in our own facility.
  • Texture black powder-coated for superior protection.
  • Laser-cut and formed to ensure a great fit.
  • Made in Batesville, Arkansas

Models: 2018-Current GC1K Stage 2 & 3

Part # 793-1108-00

CREW UTV COVER

Protect your UTV from the elements! More than any other vehicle your UTV is subjected to all kinds of rain, snow, ice, dirt, and more. Preserve your machine's plastics and parts with this top quality cover.

FEATURES:
  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all crew cabs

Part #: 793-6004-00

Dimensions: 160" L x 64" W x 80" H

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

UNIVERSAL ROOF CARGO RACK

Looking to keep extra cargo and riding gear or maybe even your coolers stored away while out riding the trails? If so, then you are guaranteed to get what you ask for with this adjustable roof cargo rack. Made from solid American steel and black powder-coated, it's built to last.

Models: all

Part #: 793-1041-00

Dimensions: 33" L x 51-59" W x 5" H

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

GC1K FRONT FOLDING WINDSHIELD

Add a little versatility to your Intimidator GC1K with our folding windshield. This unit was engineered to stand the test. Keep the wind, rain, and dust from coming in the front of your GC1K. Made from 1/4" thick polycarbonate with a clear strip hinge that does not affect the driver's view.

FEATURES:

  • The bottom has a gasket to protect the body of your unit
  • The hood compartment is still accessible.
  • Includes all hardware and instructions
  • The windshield is compatible with any GC1K roof

Models: all GC1Ks

Part #: 793-1107-00

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

LIGHT BAR/ MOUNT ASSEMBLY FOR THE GC1K FRONT FOLDING WINDSHIELD

When you already have your windshield and aluminum top installed, but decide you want to also have a light bar this is what you need. This assembly kit mounts the 30" light bar directly underneath the roof since this is used with the aluminum roof, it can not be mounted on top.

FEATURES:

  • 120 Watts
  • Up to 13,0000 Lumens
  • Custom Optical Lens
  • Mounting Brackets
  • Hardware Included
  • 30" Horizontal Light Bar
  • Black Extruded Aluminum
  • Harness

Notes: This kit only works with aluminum tops and does not include windshield or top

Models: all GC1Ks - with aluminum top only

Part #: 693-3414-00

Dimensions: 61" L x 25" x 9" H

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

GC1K REAR SQUARE TUBE BUMPER WITH POD LIGHTS

Made from solid steel this a must-have to protect your GC1K when putting it through rough terrain while the two 4" light pods add extra style and safety to your UTV. The bumper is powder-coated black and comes with all the necessary hardware and instructions for installing.

For installation instructions click here

Models: GC1K & GC1K Crew only

Part #: 793-1117-00

Dimensions: 59" L x 11" W x 8" H

CREW ALUMINUM TOP

The powder-coated black aluminum top is .080" thick and has 3/8” steel rods down each side for added stability. This tight-fitting top will stand up to just about anything with less rattle and less chance of breaking than plastic tops. Bad Dawg's top comes in two pieces and has all the hardware you will need for an easy installation.

FEATURES:

  • Made from .080" thick aluminum
  • Powder-coated black for durability
  • 3/8" thick steel rod on each side adds stability
  • Two-piece structure
  • All instructions and hardware included
  • Easy to install
  • Made in the USA

Models: 2014-Current all Crew cab models

Part #: 793-1026-10

GC1K BED MAT

Add a layer of protection to your GC1K cargo bed, with our GC1K Bed Mat. Made from heavy-duty rubber, this mat will keep your plastics underneath looking like new. Easy to remove for cleaning or storage.

Models: GC1K Class and GC1K Crew

Part # 793-1132-00

GC1K REVERSE LIGHT ASSEMBLY

The GC1K Reverse Light allows for safety when backing up. Whether it's dark out and extra light is needed or used as a safety feature for work vehicles. This 4" pod light is going to be just what you need.

Models: GC1K and GC1K Crew

Part #: 793-1128-00

INTIMIDATOR SNOW PLOW

Bad Dawgs heavy duty Intimidator Snow Plow with electric actuator comes with 650 lbs of down pressure that enables reliable back dragging and prevents the plow from climbing over icy surfaces. With a speed of 1" per second and a 10" stroke, you'll make short work of the task at hand. The plow has an easy left to right adjustment by simply pulling a pin. All plows are black powder coated to give you added protection.

Models: all with 2" front receiver hitch

Part #: 793-1038-00

SPORTECH CREW PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Crew series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This top is a two-piece roof and includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current all crew cab models

Part #: 793-1103-00

STRIKE FORCE ACCESSORY BAG

Tired of getting stuck? Well, the Bad Dawg Strike Force Accessory Bag will not keep you from getting stuck, but it will make it easier to get unstuck. This Winch Recovery Kit includes a storage bag, snatch block, two clevis c-shackles, and two heavy-duty recovery straps. The heavy-duty recovery straps come in 8' and 25' lengths. This is a must-have for anyone who likes to take their ATVs or Side X Sides off the beaten path!

Models: all

Part #: 793-3219-00

GC1K REAR BUMPER

GC1K Rear Bumper made from solid steel is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing. With its quick and easy install, it's guaranteed to make your Intimidator look great and also add the extra protection to the rear of your machine!

Models: all GC1Ks

Part #: 793-1109-00


GC1K


REAR CARGO RACK

If you're looking to add extra space to your Intimidator UTV, here it is. The Intimidator Rear Cargo Rack allows the rider to carry extras to and from the stand, as well as tools on the farm. Bad Dawg's Rear Cargo Rack is made for the Intimidator UTV and allows the rider to carry the extras needed whether it's coolers, hunting supplies, or deer feed. This all-welded, solid steel construction has 3/4" tubes that mount on the back of the cab.

Models: 2014-Current Classic, GC1K, and Truck Series (no Crews)

Part #: 793-1016-00

2018-2019 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than by adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Brake Light Jumper
  • Harness

Models: 2018-2019 GC1K Single Cab, Crew, and Truck

Part #: 686-0099-00

2020 GC1K TURN SIGNAL KIT

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Tail Light Upgrade

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2020 GC1K, GC1K Crew, GC1K Truck

Part #: 686-0098-00

GCK1 DOT WINDSHIELD

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA

Notes: Product is shipped freight. Please inspect the product carefully before signing and accepting the shipment. Once the product has been signed for, we are no longer liable for damages incurred during shipping. 

Models: all GC1K models

Part #: 793-1101-00

GC1K HOOD MOUNTED LIGHT BAR ASSEMBLY

If you're doing any night riding or just need more lighting, this is the light bar for you. All items for mounting are included.

FEATURES: 
  • 60 watt 14" Bad Dawg light bar
  • 6,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Models: all GC1Ks

Part #: 693-3415-00

GCK1 FRONT FULL LEXAN WINDSHEILD

Putting a windshield on your Intimidator is a great investment. Being free of dust, bugs and flying debris will make your ride a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more enjoyable rides in their UTV? With Bad Dawg’s easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

FEATURES:

  • Made from 1/4" thick Lexan polycarbonate
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: all GC1Ks

Part #: 793-1100-00

SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

GC1K VERTICAL LIGHT BAR SWITCH

GC1K Vertical Light Bar Switch

Models: All

Part # 786-2056-00

Dimensions: 1.710" L x .860 W

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
GC1K STAGE 1 BUMPER UPGRADE

Upgrade from the Base model bumper to the GC1K Stage 1 Bumper. This adds a 2" front receiver hitch and will make your GC1K Base bumper ready.

Models: GC1K and GC1K Crew Base only

Part # 793-1126-00

GC1K STAGE 2 BUMPER UPGRADE

This upgrades your GC1K Stage 1 bumper to a GC1K Stage 2. This feature adds a cool look and a larger bar to protect the grill area.

Models: GC1K and GC1K Crew

Part # 793-1124-00


Notes: Must have GC1K Stage 1 bumper. 

GC1K STAGE 3 BUMPER UPGRADE

Upgrade your GC1K Stage 2 bumper to the GC1K Stage 3. This upgrade adds the hoops that protect the headlight area.

Models: GC1K and GC1K Crew

Part # 793-1122-00

Notes: Must have the GC1K Stage 2 bumper for this to work. 

WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

GC1K FRONT BUMPER

Bad Dawg Accessories takes pride in building the toughest and best-looking bumpers on the market. All of our bumpers are built in our own facility with the highest regard for quality and design features.

FEATURES:

  • Your factory winch mount will be used with this bumper.
  • Replaces your stock front brush guard.
  • Easy, bolt up installation (no drilling or cutting required).
  • Made from heavy-duty 2"x2" square tubing along with .125" steel for added extra protection.
  • Hand welded in our own facility.
  • Texture black powder-coated for superior protection.
  • Laser-cut and formed to ensure a great fit.
  • Made in Batesville, Arkansas

Models: 2018-Current GC1K Stage 2 & 3

Part # 793-1108-00

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

UNIVERSAL ROOF CARGO RACK

Looking to keep extra cargo and riding gear or maybe even your coolers stored away while out riding the trails? If so, then you are guaranteed to get what you ask for with this adjustable roof cargo rack. Made from solid American steel and black powder-coated, it's built to last.

Models: all

Part #: 793-1041-00

Dimensions: 33" L x 51-59" W x 5" H

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

GC1K FRONT FOLDING WINDSHIELD

Add a little versatility to your Intimidator GC1K with our folding windshield. This unit was engineered to stand the test. Keep the wind, rain, and dust from coming in the front of your GC1K. Made from 1/4" thick polycarbonate with a clear strip hinge that does not affect the driver's view.

FEATURES:

  • The bottom has a gasket to protect the body of your unit
  • The hood compartment is still accessible.
  • Includes all hardware and instructions
  • The windshield is compatible with any GC1K roof

Models: all GC1Ks

Part #: 793-1107-00

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

QUICK CONNECT PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Classic Series and Truck Series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This one piece roof includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current Intimidator Classic, GC1K and Truck Series

Part #: 793-1102-00

LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

LIGHT BAR/ MOUNT ASSEMBLY FOR THE GC1K FRONT FOLDING WINDSHIELD

When you already have your windshield and aluminum top installed, but decide you want to also have a light bar this is what you need. This assembly kit mounts the 30" light bar directly underneath the roof since this is used with the aluminum roof, it can not be mounted on top.

FEATURES:

  • 120 Watts
  • Up to 13,0000 Lumens
  • Custom Optical Lens
  • Mounting Brackets
  • Hardware Included
  • 30" Horizontal Light Bar
  • Black Extruded Aluminum
  • Harness

Notes: This kit only works with aluminum tops and does not include windshield or top

Models: all GC1Ks - with aluminum top only

Part #: 693-3414-00

Dimensions: 61" L x 25" x 9" H

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

GC1K REAR SQUARE TUBE BUMPER WITH POD LIGHTS

Made from solid steel this a must-have to protect your GC1K when putting it through rough terrain while the two 4" light pods add extra style and safety to your UTV. The bumper is powder-coated black and comes with all the necessary hardware and instructions for installing.

Models: GC1K & GC1K Crew only

Part #: 793-1117-00

Dimensions: 59" L x 11" W x 8" H

GC1K BED MAT

Add a layer of protection to your GC1K cargo bed, with our GC1K Bed Mat. Made from heavy-duty rubber, this mat will keep your plastics underneath looking like new. Easy to remove for cleaning or storage.

Models: GC1K Class and GC1K Crew

Part # 793-1132-00

GC1K REVERSE LIGHT ASSEMBLY

The GC1K Reverse Light allows for safety when backing up. Whether it's dark out and extra light is needed or used as a safety feature for work vehicles. This 4" pod light is going to be just what you need.

Models: GC1K and GC1K Crew

Part #: 793-1128-00

INTIMIDATOR SNOW PLOW

Bad Dawgs heavy duty Intimidator Snow Plow with electric actuator comes with 650 lbs of down pressure that enables reliable back dragging and prevents the plow from climbing over icy surfaces. With a speed of 1" per second and a 10" stroke, you'll make short work of the task at hand. The plow has an easy left to right adjustment by simply pulling a pin. All plows are black powder coated to give you added protection.

Models: all with 2" front receiver hitch

Part #: 793-1038-00

STRIKE FORCE ACCESSORY BAG

Tired of getting stuck? Well, the Bad Dawg Strike Force Accessory Bag will not keep you from getting stuck, but it will make it easier to get unstuck. This Winch Recovery Kit includes a storage bag, snatch block, two clevis c-shackles, and two heavy-duty recovery straps. The heavy-duty recovery straps come in 8' and 25' lengths. This is a must-have for anyone who likes to take their ATVs or Side X Sides off the beaten path!

Models: all

Part #: 793-3219-00

GC1K REAR BUMPER

GC1K Rear Bumper made from solid steel is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing. With its quick and easy install, it's guaranteed to make your Intimidator look great and also add the extra protection to the rear of your machine!

Models: all GC1Ks

Part #: 793-1109-00

CLASSIC UTV COVER

Keep your UTV clean from all the snow, dust, sap, bugs, and more. There is nothing more frustrating than having to clean your machine every time you use it. With this cover, your UTV will always be pristine. Simply remove the cover, jump on and go.

FEATURES:

  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all single cab UTVs

Part #: 793-6003-00

Dimensions: 122" L x 64" W x 80" H

CLASSIC ALUMINUM TOP

This top is constructed with .080" thick aluminum that has been powder coated for a long-lasting finish that looks great and is extremely durable. Along each side are 3/8" thick rods to increase stability and hold up against anything thrown your way. Made here in the USA, you'll get a quality made product that is easy to install so you can enjoy your ride no matter the weather.
FEATURES:
  • Made from 12 gauge .080" thick aluminum
  • Powder-coated black for durability
  • 3/8" thick steel rod on each side add stability
  • All instructions and hardware included
  • Easy to install
  • Made in the USA

Models: 2014-Current Classic, Truck, and GC1K single cab

Part #: 793-1031-10

GC1K ARMOR TECH CAB

This cab enclosure system comes complete with doors, roof, back, and front. This is a very high-quality system that is made here in the USA.

FEATURES:

  • All steel construction
  • Fold-down tempered glass windshield
  • Rear Sliding glass window
  • Roof edge is guttered to keep you dry
  • Doors have Plexiglas upper windows & glass lower.
  • All hardware necessary for mounting is included
  • Vortex coated for durability
  • Installs in minutes

Notes: Manual Wiper (793-1082-10) and XL Rearview Mirror (793-1082-30) sold separately

Models: GC1K single cab

Part #: 793-1113-00

GC1K ROCK SLIDERS

BadDawg's Rock Sliders are made from solid steel and are a must-have to protect your UTV while putting it through rough terrain. Protect your machine with these solid steel, round tubing nerf bars that will give your ride not only a great look but added protection from rocks, trees, and trail debris. These Rock Sliders are black powder coated and come with all necessary hardware and instructions for installing.

Models: GC1K Classic

Part # 793-1129-00

1.75'' UNIVERSAL MIRROR

The universal bolt-on UTV mirror's bracket allows for easy bolt-on installation without drilling.

Models: all

Part #: 693-3550-00


Crew


SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

UNDER-SEAT STORAGE COMPARTMENT

Looking for a little extra storage space on your Intimidator? This under-seat storage tray is just what you need. The thermoplastic tray is made of the highest quality and is able to withstand extreme temperature conditions and will not crack in cold weather. Installation is simple: just drop it in, line it up, and install a couple of screws (included), and you're good to go!

Models: Intimidator Crew and Truck (will not fit Classic or any GC1Ks)

Part #: 793-1051-00

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

CREW UTV COVER

Protect your UTV from the elements! More than any other vehicle your UTV is subjected to all kinds of rain, snow, ice, dirt, and more. Preserve your machine's plastics and parts with this top quality cover.

FEATURES:
  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all crew cabs

Part #: 793-6004-00

Dimensions: 160" L x 64" W x 80" H

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

UNIVERSAL ROOF CARGO RACK

Looking to keep extra cargo and riding gear or maybe even your coolers stored away while out riding the trails? If so, then you are guaranteed to get what you ask for with this adjustable roof cargo rack. Made from solid American steel and black powder-coated, it's built to last.

Models: all

Part #: 793-1041-00

Dimensions: 33" L x 51-59" W x 5" H

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

CREW ALUMINUM TOP

The powder-coated black aluminum top is .080" thick and has 3/8” steel rods down each side for added stability. This tight-fitting top will stand up to just about anything with less rattle and less chance of breaking than plastic tops. Bad Dawg's top comes in two pieces and has all the hardware you will need for an easy installation.

FEATURES:

  • Made from .080" thick aluminum
  • Powder-coated black for durability
  • 3/8" thick steel rod on each side adds stability
  • Two-piece structure
  • All instructions and hardware included
  • Easy to install
  • Made in the USA

Models: 2014-Current all Crew cab models

Part #: 793-1026-10

SNOW PLOW

Bad Dawgs heavy duty Intimidator Snow Plow with electric actuator comes with 650 lbs of down pressure that enables reliable back dragging and prevents the plow from climbing over icy surfaces. With a speed of 1" per second and a 10" stroke, you'll make short work of the task at hand. The plow has an easy left to right adjustment by simply pulling a pin. All plows are black powder coated to give you added protection.

Models: all with 2" front receiver hitch

Part #: 793-1038-00

SPORTECH CREW PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Crew series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This top is a two-piece roof and includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current all crew cab models

Part #: 793-1103-00

STRIKE FORCE ACCESSORY BAG

Tired of getting stuck? Well, the Bad Dawg Strike Force Accessory Bag will not keep you from getting stuck, but it will make it easier to get unstuck. This Winch Recovery Kit includes a storage bag, snatch block, two clevis c-shackles, and two heavy-duty recovery straps. The heavy-duty recovery straps come in 8' and 25' lengths. This is a must-have for anyone who likes to take their ATVs or Side X Sides off the beaten path!

Models: all

Part #: 793-3219-00

1.75'' UNIVERSAL MIRROR

The universal bolt-on UTV mirror's bracket allows for easy bolt-on installation without drilling.

Models: all

Part #: 693-3550-00

SQUARE TUBE BUMPER (G2)

The Intimidator Rear Bumper is made from solid steel and is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing.

Models: 2014-Current Classic and Crew (not GC1K)

Part #: 793-1092-00

INTIMIDATOR TOOL BOX

This toolbox is manufactured with high-grade aluminum, laser-cut, bent, and welded, in our own facility to ensure the highest quality. Designed to fit snugly in your Intimidator bed and still leave room for other items. This product is ideal for hauling around those items that would normally be slung around; fencing tools, chain saws, tool pouches, chains, etc. Easy, drop-in installation, and a few self-tapping screws, and you're ready to roll!

Models: all Classic, Crew, and Truck (not GC1K)

Part #: 793-1047-10

Dimensions: 56 1/4" L x 10 1/4" W x 15" H

INTIMIDATOR CARGO BED MAT

Protect the finish of your UTV bed with this heavy-duty rubber cargo mat.

Models: 2014-Current Classic and Crew (not GC1K or VersaBed)

Part #: 793-1015-00

INTIMIDATOR FRONT BUMPER - G1

Bad Dawgs Intimidator heavy-duty front bumper is made in the USA. Our bumpers are made with American steel that is 1/8" thick and requires absolutely no drilling to fit. Black powder coated for protection as well as a great look. The bumpers also allow a winch to be mounted inside the grill and accommodates up to a 3500lb winch.

Models: 2014-2017 Classic, Crew, and Truck

Part #: 793-1005-00

INTIMIDATOR BACK/DUST PANEL

The Intimidator Back Dust Panel is made to protect you from the elements. This has a large Lexan opening for clear visibility to remove blind spots for the rider and is made from a high-quality thermoplastic material that will not fracture during cold weather. The Back Dust Panel comes with all hardware and instructions needed to make installation easy.

Notes: only compatible with Intimidator Plastic Top (793-1000-00)

Models: 2014-Current Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1012-10

INTIMIDATOR ARMORTECH CREW CAB

This cab enclosure system comes complete with doors, roof, back, and front. This is a very high-quality system that is made right here in the USA.

FEATURES:

  • All steel construction
  • Fold-down tempered glass windshield
  • Rear Sliding glass window
  • Roof edge is guttered to keep you dry
  • Doors have Plexiglas upper windows & glass lower
  • All hardware necessary for mounting is included
  • Vortex coated for durability
  • Installs in minutes

Notes: Manual Wiper sold separately (793-1082-10)

Models: 2014-Current Intimidator Crew (not GC1K)

Part #: 793-1093-00

INTIMIDATOR FRONT BUMPER - G2

This bumper is constructed from the highest quality steel, hand-welded in our own facility with particular attention to details. This bumper comes winch ready for up to a 4000 lb Warn Winch.

FEATURES: 
  • Easy access to the front receiver hitch
  • Easy bolt up installation
  • Made from .125" high-grade steel
  • Reinforced with .25" gussets
  • Optional bull bar shown in pictures

Notes: the bull bar is not included in the bumper price and must be ordered separate 793-1050-20

Models: 2014-2017 Classic, Crew, Diesel (not GC1K)

Part #: 793-1060-00

INTIMIDATOR BLINKER KIT (2013-2017)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Hardware Kit
  • Light Brackets and Grommets

Note: The pod will override the dash control for the headlight high and low beams. 

Models: 2013-2017 Intimidator Classic Series (non GC1K)

Part # 793-4076-00

INTIMIDATOR TURN SIGNAL KIT (2018-CURRENT)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:
  • Horn
  • Turn signal pod
  • Hardware kit

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2018 - Current Classic, Crew, and Truck (not GC1K)

Part #: 686-0096-00

INTIMIDATOR TILT OUT WINDSHIELD KIT

Temps are changing. Days are getting shorter. This can only mean one thing. A new season is right around the corner and if you're looking for a windshield that is made for all seasons check out the Intimidator Tilt Out Windshield.

FEATURES:

  • 1/4" thick polycarbonate
  • Hard coating on both sides of the windshield for durability and scratch resistance
  • Windshield edges are super-smooth for safety
  • Custom bend design provides maximum rigidity and strength
  • Versatile tilt mechanism for refreshing cabin ventilation: Closed and full extension
  • Extreme rigidity in each position
  • Open positions are designed for low-speed airflow only.
  • High-speed riding and trailering require the windshield to be in the FULL CLOSED position

Models: 2014 - Current Intimidator Classic, Crew, and Truck (non-GC1K models)

Part #: 793-1121-00

INTIMIDATOR HORIZONTAL LIGHT BAR SWITCH

Intimidator Horizontal Light Bar Switch

Models: all

Part # 786-3000-00

Dimensions: 1.710" L x .860" W

INTIMIDATOR DOT SAFETY GLASS WINDSHIELD W/ WIPER

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield with Hand Operated Wiper by Bad Dawg Accessories is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA!

Notes:  Product is shipped freight. Please inspect the product carefully before signing and accepting shipment. Once the product has been signed for, we are no longer liable for damages incurred during shipping.

Models: 2014 - Current Intimidator Classic, Crew, and Truck (not GC1K models)

Part #: 793-1030-00

INTIMIDATOR 2'' BRACKET LIFT

Need a little more ground clearance? We offer a complete, bolt-on kit to give your machine a 2" lift. Made with high grade, high strength 1/4" steel. These parts are laser, precision-cut for an exact fit every time. It comes with a complete hardware kit including all the necessary bolts, nuts, and spacers.

Models: Classic, Crew, and Truck models (not GC1K)

Part #: 793-1033-00

INTIMIDATOR FRONT BUMPER - BULL BAR

If you need a little added protection for your winch and your plastic, this product is a great addition to your bumper. Easy bolt-on installation. Low cost and high quality make this addition a must-have!

Notes: this is the bull bar only, bumper sold separately. It works on the Intimidator Front Bumper (G2) (793-1060-00

Models: Classic, Crew, Truck (not GC1K)

Part #: 793-1050-20

INTIMIDATOR REAR BUMPER (TUBE STYLE)

The Intimidator Rear Bumper is made from solid steel and is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing.

Models: 2014-Current Classic and Crew series (not Truck, VersaBed or GC1K)

Parts #: 793-1003-00

2018 INTIMIDATOR SHEET METAL BUMPER

This bumper, as with all our products, is constructed from the highest quality steel, hand-welded in our own facility with particular attention to details. This bumper comes winch ready for up to a 4000lb Warn Winch.

FEATURES:

  • Easy access to the front receiver hitch
  • Easy bolt up installation
  • Made from .125" high-grade steel
  • Reinforced with .25" gussets

Notes: the bull bar is not included in the bumper price and must be ordered separate 793-1050-20

Models: 2018-Current Intimidator Classic and Crew

Part # 793-1105-00

Dimensions: 58" L x 25" W x 9" H

INTIMIDATOR FRONT WINDSHIELD - LEXAN

Putting a windshield on your UTV is a great investment. Being free of dust, bugs, and flying debris will make your riding a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more comfortable rides in their UTV? With Bad Dawgs easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

This Lexan windshield is 1/4" thick and has a sliding vent at the bottom to adjust your airflow on those warmer days. The scratch-resistant material for this windshield is made in the USA and will provide you and your riders with clear and protected riding enjoyment. Made specifically for the Intimidator, it's a precise fit every time.

FEATURES:
  • Made from 1/4" thick Lexan polycarbonate
  • Sliding vents for adjustable airflow
  • Scratch-resistant material
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: 2014-2018 Classic, Crew, and Truck (not GC1Ks)

Part #: 793-1002-10

INTIMIDATOR FRONT FOLDING LEXAN WINDSHIELD

Rain, snow, or sunshine, you've got a lot of work around the farm regardless and the Intimidator is your right hand. When you have to go out and do chores, you want to ride without the harsh wind or cold rain in your face. Bad Dawg’s Full Folding Front Windshield gives you the option of blocking the bad weather or folding it down to enjoy the fresh breeze of a nice day. Outfit your machine today with this accessory and make those outside chores a little less dreadful.

This windshield offers the flexibility to choose between a full or half windshield in one by having a clear folding strip that connects the two pieces of the windshield. The bottom gasket will contour the hood of your side by side to protect the body and seal the edges. The hood compartment is fully accessible because the windshield doesn’t block it at any point when installed. All hardware and instructions are included for a quick and easy installation.

FEATURES:

  • Made from 1/4" thick polycarbonate
  • Clear strip at fold doesn't interfere with the view
  • Two windshields in one
  • Bottom gasket protects the body of the machine
  • Hood compartment completely accessible
  • Includes all hardware and instructions
  • Easy installation
  • Made in the USA

Notes: 2014-201818 Intimidator Classic, Crew Cab, and Truck Series

Models: 2014-2018 Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1040-10


Classic Truck


INTIMIDATOR REAR CARGO RACK

If you're looking to add extra space to your Intimidator UTV, here it is. The Intimidator Rear Cargo Rack allows the rider to carry extras to and from the stand, as well as tools on the farm. Bad Dawg's Rear Cargo Rack is made for the Intimidator UTV and allows the rider to carry the extras needed whether it's coolers, hunting supplies, or deer feed. This all-welded, solid steel construction has 3/4" tubes that mount on the back of the cab.

Models: 2014-Current Classic, GC1K, and Truck Series (no Crews)

Part #: 793-1016-00

INTIMIDATOR SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

UNDER-SEAT STORAGE COMPARTMENT

Looking for a little extra storage space on your Intimidator? This under-seat storage tray is just what you need. The thermoplastic tray is made of the highest quality and is able to withstand extreme temperature conditions and will not crack in cold weather. Installation is simple: just drop it in, line it up, and install a couple of screws (included), and you're good to go!

Models: Intimidator Crew and Truck (will not fit Classic or any GC1Ks)

Part #: 793-1051-00

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

CREW UTV COVER

Protect your UTV from the elements! More than any other vehicle your UTV is subjected to all kinds of rain, snow, ice, dirt, and more. Preserve your machine's plastics and parts with this top quality cover.

FEATURES:
  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all crew cabs

Part #: 793-6004-00

Dimensions: 160" L x 64" W x 80" H

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

INTIMIDATOR CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

QUICK CONNECT PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Classic Series and Truck Series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This one piece roof includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current Intimidator Classic, GC1K and Truck Series

Part #: 793-1102-00

INTIMIDATOR LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

INTIMIDATOR SNOW PLOW

Bad Dawgs heavy duty Intimidator Snow Plow with electric actuator comes with 650 lbs of down pressure that enables reliable back dragging and prevents the plow from climbing over icy surfaces. With a speed of 1" per second and a 10" stroke, you'll make short work of the task at hand. The plow has an easy left to right adjustment by simply pulling a pin. All plows are black powder coated to give you added protection.

Models: all with 2" front receiver hitch

Part #: 793-1038-00

STRIKE FORCE ACCESSORY BAG

Tired of getting stuck? Well, the Bad Dawg Strike Force Accessory Bag will not keep you from getting stuck, but it will make it easier to get unstuck. This Winch Recovery Kit includes a storage bag, snatch block, two clevis c-shackles, and two heavy-duty recovery straps. The heavy-duty recovery straps come in 8' and 25' lengths. This is a must-have for anyone who likes to take their ATVs or Side X Sides off the beaten path!

Models: all

Part #: 793-3219-00

CLASSIC ALUMINUM TOP

This top is constructed with .080" thick aluminum that has been powder coated for a long-lasting finish that looks great and is extremely durable. Along each side are 3/8" thick rods to increase stability and hold up against anything thrown your way. Made here in the USA, you'll get a quality made product that is easy to install so you can enjoy your ride no matter the weather.
FEATURES:
  • Made from 12 gauge .080" thick aluminum
  • Powder-coated black for durability
  • 3/8" thick steel rod on each side add stability
  • All instructions and hardware included
  • Easy to install
  • Made in the USA

Models: 2014-Current Classic, Truck, and GC1K single cab

Part #: 793-1031-10

1.75'' UNIVERSAL MIRROR

The universal bolt-on UTV mirror's bracket allows for easy bolt-on installation without drilling.

Models: all

Part #: 693-3550-00

INTIMIDATOR TOOL BOX

This toolbox is manufactured with high-grade aluminum, laser-cut, bent, and welded, in our own facility to ensure the highest quality. Designed to fit snugly in your Intimidator bed and still leave room for other items. This product is ideal for hauling around those items that would normally be slung around; fencing tools, chain saws, tool pouches, chains, etc. Easy, drop-in installation, and a few self-tapping screws, and you're ready to roll!

Models: all Classic, Crew, and Truck (not GC1K)

Part #: 793-1047-10

Dimensions: 56 1/4" L x 10 1/4" W x 15" H

INTIMIDATOR FRONT BUMPER - G1

Bad Dawgs Intimidator heavy-duty front bumper is made in the USA. Our bumpers are made with American steel that is 1/8" thick and requires absolutely no drilling to fit. Black powder coated for protection as well as a great look. The bumpers also allow a winch to be mounted inside the grill and accommodates up to a 3500lb winch.

Models: 2014-2017 Classic, Crew, and Truck

Part #: 793-1005-00

INTIMIDATOR FRONT BUMPER - G2

This bumper is constructed from the highest quality steel, hand-welded in our own facility with particular attention to details. This bumper comes winch ready for up to a 4000 lb Warn Winch.

FEATURES: 
  • Easy access to the front receiver hitch
  • Easy bolt up installation
  • Made from .125" high-grade steel
  • Reinforced with .25" gussets
  • Optional bull bar shown in pictures

Notes: the bull bar is not included in the bumper price and must be ordered separate 793-1050-20

Models: 2014-2017 Classic, Crew, Diesel (not GC1K)

Part #: 793-1060-00

INTIMIDATOR BACK/DUST PANEL

The Intimidator Back Dust Panel is made to protect you from the elements. This has a large Lexan opening for clear visibility to remove blind spots for the rider and is made from a high-quality thermoplastic material that will not fracture during cold weather. The Back Dust Panel comes with all hardware and instructions needed to make installation easy.

Notes: only compatible with Intimidator Plastic Top (793-1000-00)

Models: 2014-Current Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1012-10

INTIMIDATOR BLINKER KIT (2013-2017)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Hardware Kit
  • Light Brackets and Grommets

Note: The pod will override the dash control for the headlight high and low beams. 

Models: 2013-2017 Intimidator Classic Series (non GC1K)

Part # 793-4076-00

INTIMIDATOR TURN SIGNAL KIT (2018-CURRENT)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:
  • Horn
  • Turn signal pod
  • Hardware kit

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2018 - Current Classic, Crew, and Truck (not GC1K)

Part #: 686-0096-00

INTIMIDATOR TILT OUT WINDSHIELD KIT

Temps are changing. Days are getting shorter. This can only mean one thing. A new season is right around the corner and if you're looking for a windshield that is made for all seasons check out the Intimidator Tilt Out Windshield.

FEATURES:

  • 1/4" thick polycarbonate
  • Hard coating on both sides of the windshield for durability and scratch resistance
  • Windshield edges are super-smooth for safety
  • Custom bend design provides maximum rigidity and strength
  • Versatile tilt mechanism for refreshing cabin ventilation: Closed and full extension
  • Extreme rigidity in each position
  • Open positions are designed for low-speed airflow only.
  • High-speed riding and trailering require the windshield to be in the FULL CLOSED position

Models: 2014 - Current Intimidator Classic, Crew, and Truck (non-GC1K models)

Part #: 793-1121-00

HORIZONTAL LIGHT BAR SWITCH

Intimidator Horizontal Light Bar Switch

Models: all

Part # 786-3000-00

Dimensions: 1.710" L x .860" W

INTIMIDATOR DOT SAFETY GLASS WINDSHIELD W/ WIPER

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield with Hand Operated Wiper by Bad Dawg Accessories is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA!

Notes:  Product is shipped freight. Please inspect the product carefully before signing and accepting shipment. Once the product has been signed for, we are no longer liable for damages incurred during shipping.

Models: 2014 - Current Intimidator Classic, Crew, and Truck (not GC1K models)

Part #: 793-1030-00

INTIMIDATOR 2'' BRACKET LIFT

Need a little more ground clearance? We offer a complete, bolt-on kit to give your machine a 2" lift. Made with high grade, high strength 1/4" steel. These parts are laser, precision-cut for an exact fit every time. It comes with a complete hardware kit including all the necessary bolts, nuts, and spacers.

Models: Classic, Crew, and Truck models (not GC1K)

Part #: 793-1033-00

INTIMIDATOR FRONT BUMPER - BULL BAR

If you need a little added protection for your winch and your plastic, this product is a great addition to your bumper. Easy bolt-on installation. Low cost and high quality make this addition a must-have!

Notes: this is the bull bar only, bumper sold separately. It works on the Intimidator Front Bumper (G2) (793-1060-00

Models: Classic, Crew, Truck (not GC1K)

Part #: 793-1050-20

INTIMIDATOR FRONT WINDSHIELD - LEXAN

Putting a windshield on your UTV is a great investment. Being free of dust, bugs, and flying debris will make your riding a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more comfortable rides in their UTV? With Bad Dawgs easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

This Lexan windshield is 1/4" thick and has a sliding vent at the bottom to adjust your airflow on those warmer days. The scratch-resistant material for this windshield is made in the USA and will provide you and your riders with clear and protected riding enjoyment. Made specifically for the Intimidator, it's a precise fit every time.

FEATURES:
  • Made from 1/4" thick Lexan polycarbonate
  • Sliding vents for adjustable airflow
  • Scratch-resistant material
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: 2014-2018 Classic, Crew, and Truck (not GC1Ks)

Part #: 793-1002-10

INTIMIDATOR FRONT FOLDING LEXAN WINDSHIELD

Rain, snow, or sunshine, you've got a lot of work around the farm regardless and the Intimidator is your right hand. When you have to go out and do chores, you want to ride without the harsh wind or cold rain in your face. Bad Dawg’s Full Folding Front Windshield gives you the option of blocking the bad weather or folding it down to enjoy the fresh breeze of a nice day. Outfit your machine today with this accessory and make those outside chores a little less dreadful.

This windshield offers the flexibility to choose between a full or half windshield in one by having a clear folding strip that connects the two pieces of the windshield. The bottom gasket will contour the hood of your side by side to protect the body and seal the edges. The hood compartment is fully accessible because the windshield doesn’t block it at any point when installed. All hardware and instructions are included for a quick and easy installation.

FEATURES:

  • Made from 1/4" thick polycarbonate
  • Clear strip at fold doesn't interfere with the view
  • Two windshields in one
  • Bottom gasket protects the body of the machine
  • Hood compartment completely accessible
  • Includes all hardware and instructions
  • Easy installation
  • Made in the USA

Notes: 2014-201818 Intimidator Classic, Crew Cab, and Truck Series

Models: 2014-2018 Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1040-10

INTIMIDATOR CLASSIC ARMORTECH CAB

This cab enclosure system comes complete with doors, roof, back, and front. This high-quality system is made in the USA.
FEATURES:
  • All steel construction
  • Fold-down tempered glass windshield
  • Rear sliding glass window
  • Roof edge is uttered to keep you dry
  • Doors have plexiglass upper windows & glass lower
  • All hardware necessary for mounting is included
  • Vortex coated for durability
  • Installs in minutes

Notes: manual wiper (793-1082-10) and XL rearview mirror (793-1082-30) sold separately

Models: 2014-Current Classic

Part #: 793-1085-00

INTIMIDATOR HALF DOORS

Looking for half doors that not only have a great look but is built to withstand some of the worst conditions? Bad Dawg has set the bar even higher with their Intimidator Half Doors. These half doors are made from solid American steel and with the black powder coat finish, they are like no other.

FEATURES: 
  • Made in Batesville, AR
  • Constructed from American steel
  • Laser-cut and welded for a great look, great finish, and durable construction
  • Powder-coated texture black for superior protection and a long-lasting finish

Note: sold as a pair

Models: Classic and Truck (not GC1K)

Part #: 793-3221-00


Classic


REAR CARGO RACK

If you're looking to add extra space to your Intimidator UTV, here it is. The Intimidator Rear Cargo Rack allows the rider to carry extras to and from the stand, as well as tools on the farm. Bad Dawg's Rear Cargo Rack is made for the Intimidator UTV and allows the rider to carry the extras needed whether it's coolers, hunting supplies, or deer feed. This all-welded, solid steel construction has 3/4" tubes that mount on the back of the cab.

Models: 2014-Current Classic, GC1K, and Truck Series (no Crews)

Part #: 793-1016-00

INTIMIDATOR SIDE STEP

Protect your machine with these solid steel, square tubing side steps that will give your ride a great look and that extra step for getting one and out of your Intimidator. The treadplate allows for extra grip when using the side step, preventing any slipping on the smooth metal bars.

Models: All Intimidator and GC1K Units

Part #: 793-7146-00

ALUMINUM FRONT CV JOINT PROTECTORS

Running through the dirt, underbrush, and mud can be rough on the underside of your UTV. Protect your two front outer-side half-shaft CV joints with Bad Dawgs aluminum guards.

Models: all

Part #: 793-1011-00

WINCH DASH MOUNT ROCKER SWITCH

Winch Dash Mount Rocker Switch

Models: all

Part # 786-2087-00

Dimensions: 1.710" L x .860" W

UNIVERSAL FLOOR MOUNTED 4 GUN RACK

This UTV Gun Mount installs to the floor of your UTV, truck, or similar vehicle or to the bed of your UTV for easy access to your firearms. It provides a secure and safe fit, preventing vibration and movement over rough terrain. Firearms can be placed facing either direction for access from the driver or passenger side. All hardware and installation instruction are provided. Gun Rack will hold 4 guns.

  • Heavy-duty, over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock-style case
WARN VRX 45 SYNTHETIC ROPE WINCH

Warn 4500 lb. Synthetic Rope Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6056-00

Note: GC1K Base models must upgrade to GC1K Stage 1 bumper to have a winch mount. 

WARN VRX 45 WIRE ROPE

Warn VRX 4500 lb. Winch

FEATURES:

  • Includes 50’ of lightweight, easy-to-handle 1/4” synthetic rope, hawse fairlead, and zinc-plated hook
  • Huge 4,500 lb. capacity available for the hardest-working UTVs
  • Load-holding brake for great control
  • Durable all-metal construction
  • New clutch design based on legendary WARN 4WD hub lock know-how
  • Complete waterproof sealing keeps all the elements out
  • Semi-gloss back powder-coated finish and stainless steel fasteners for corrosion resistance
  • Smooth and reliable all-metal three-stage planetary gear train
  • Dash-mounted rocker control and corded remote
  • Limited lifetime warranty (mechanical), 3-year warranty (electrical)
  • Bolt pattern: 3.0" x 6.59"

Models: all

Part # 693-6055-00

Note: GC1K Base models must upgrade to the GC1K Stage 1 bumper with winch mount plate. 

1.75'' BREAKAWAY MIRROR

Need to see around the sides of your UTV? This set comes with a new style block between the clamp on the roll cage and the breakaway mirror. This new block's main function is to allow more adjustment of the mirror to let the rider see directly behind them. Designed specifically for UTV's it absorbs hard impacts from stray limbs, flying rocks, or other impacts. The mirrors can be easily folded back in to fit in tight situations and be adjusted vertically and horizontally.

Notes: there are two mirrors

Models: all

Part #: 693-3560-10

REAR VIEW / SIDE VIEW MIRROR

Check out the Rear View/Side View Mirror! This sleek new design offers dual purpose usage. Mount to the side for side view or to the top bar for rearview.
FEATURES:
  • Ball socket joining for virtually unlimited viewing angles
  • Shatterproof tempered glass
  • Damage resistant ABS plastic housing
  • Convex mirror for wide viewing range and stabilization
Models: all

Part #: 693-3553-00

1.75'' SOUNDBAR/LIGHT BAR ROLL CAGE CLAMP

Made of high quality black anodized aluminum and steel construction, resistance to oxidation and corrosion. It works with LED light bar with side mount screws and bolts, mount directly onto your bull bar, grille guard, car top racks and etc. This mount bracket clamp can be rotated 360° to adjust height and angle, very easy and straight forward installation, no drilling or welding required.

Notes: comes with a set of 2

Models: all

Part #: 793-2026-00

30'' BAD DAWG LED LIGHT BAR

If you're doing any night riding or just need more lighting, this is the light bar for you. The Bad Dawg 30" Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 120 watts
  • Up to 13,000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV proof
  • Waterproof
  • Mounting brackets and hardware included
Notes: Harness (693-3754-00) and Soundbar/Light Bar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3412-00

LIGHT BAR WIRE HARNESS

While not the fanciest accessory, this harness is needed to use any light bar on your UTV.

INCLUDED:

  • One wire for two connectors (this harness powers two light bars)
  • 14 gauge wire - 8.5' long
  • 6.3 plug
  • Five-foot rocker switch
  • Waterproof fuse box

Models: all

Part #: 693-3764-00

UNIVERSAL ROOF CARGO RACK

Looking to keep extra cargo and riding gear or maybe even your coolers stored away while out riding the trails? If so, then you are guaranteed to get what you ask for with this adjustable roof cargo rack. Made from solid American steel and black powder-coated, it's built to last.

Models: all

Part #: 793-1041-00

Dimensions: 33" L x 51-59" W x 5" H

14'' BAD DAWG LED LIGHT BAR

If you're doing a little night riding or just need more lighting this is the light bar for you. The 14" Bad Dawg Light Bar looks great and will allow you to ride long after the sun goes down.

FEATURES:

  • 60 watts
  • Up to 6000 lumens
  • Custom optical lens
  • Black extruded aluminum
  • IP67 rated
  • UV Proof
  • Waterproof
  • Mounting brackets and hardware included

Notes: Harness (693-3754-00) and Soundbar/Lightbar Roll Cage Clamps (793-2026-00) are not included

Models: all

Part #: 693-3411-00

Dimensions: 25" L x 5" W x 5" H

GROUNDHOG MAX WITHOUT KIT

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 43 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog Max to get to any remote food plot that your ATV can reach. The GroundHog Max can plow from 3-7 MPH and can even plow in reverse. The GroundHog Max is half as wide as a normal plow and truly makes creating food plots a one-man job. GroundHog Max can be used not only for food plots but is a great tool for creating firebreaks. The GroundHog Max can also be used for duck hunting, landscaping, and weed control.

Models: all

Part # 088-9051-00

Notes: Must have a well braced 2" receiver hitch

INTIMIDATOR CAB HEATER

When it's cold outside and you need to get warm, hop in your UTV with cabin and turn on the heater to keep your cab nice and toasty.
FEATURES: 
  • Three-speed motor
  • Heavy-duty injection molded
  • Glass-filled nylon case

Notes: runs off the radiator

Models: all

Part #: 793-5052-10

BAD DAWG GRAB HANDLES

Bad Dawg's Grab Handles are made to fit 1.75" roll cages. These Grab Handles are made to wrap around the roll cage and have Velcro seams and straps to give either the driver or passenger extra points of contact while riding.

Models: all

Part #: 693-3680-00

QUICK CONNECT PLASTIC TOP

The Intimidator side by sides are built tough to make work around the farm or job site easier. Don't let the hot sun or unexpected showers slow you down! Check out Bad Dawg's Thermoplastic Hard Top for the Intimidator Classic Series and Truck Series. If you're looking for an American made product to customize your UTV, this roof is a great option.

The polyethylene material used is durable, even in cold weather, and the roof won't fracture or warp. Designed specifically for the Intimidator, you'll get a perfect fit for your machine. This one piece roof includes all necessary hardware and instructions for an easy and quick installation.

Models: 2014-Current Intimidator Classic, GC1K and Truck Series

Part #: 793-1102-00

INTIMIDATOR LEXAN BACK PANEL

Keep dust and debris from entering the rear of your machine with the Intimidator Rear Lexan Windshield. This Lexan panel is 1/4" thick and comes with all hardware and installation instructions. Built to stay strong and not fracture even on the roughest trails.

Models: all

Part #: 793-1054-10

WET SOUNDS STEALTH 6 SPEAKER BAR WITH BLUETOOTH

Wet Sounds Stealth Ultra Series Sound Bars represent the world's first universal high-performance sound system for your Side by Side or ATV.  The patent-pending, waterproof design is built with a full extruded aluminum housing.

FEATURES:

  • Bluetooth enabled audio receiver
  • 6 high-performance speakers
  • Titanium dome tweeters for rich and dynamic performance
  • Powered by full range class D amplifier that feature auxiliary inputs
  • 2 volt line driver output to link to another soundbar
  • Waterproof connector
  • Universal L Mount brackets for end cap mounting
  • Auto turn off feature to save battery
  • Back-lit LED illuminated control panel

Models: all

Part # 793-2019-00

POWER RIDE GUN RACK

When you head to the woods in your UTV, you want to use every inch of your space wisely. It is very important to make the most of the legroom, passenger room and especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely, and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro retainer straps. This keeps it all safe and secure even in rough terrain rides. The Power-Ride Gun Rack includes an adjustable mounting base that attaches to UTV frames measuring 50 inches to 64 inches wide. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasting, dependable service.

Models: all

Part # 600-1400-00

INTIMIDATOR SNOW PLOW

Bad Dawgs heavy duty Intimidator Snow Plow with electric actuator comes with 650 lbs of down pressure that enables reliable back dragging and prevents the plow from climbing over icy surfaces. With a speed of 1" per second and a 10" stroke, you'll make short work of the task at hand. The plow has an easy left to right adjustment by simply pulling a pin. All plows are black powder coated to give you added protection.

Models: all with 2" front receiver hitch

Part #: 793-1038-00

STRIKE FORCE ACCESSORY BAG

Tired of getting stuck? Well, the Bad Dawg Strike Force Accessory Bag will not keep you from getting stuck, but it will make it easier to get unstuck. This Winch Recovery Kit includes a storage bag, snatch block, two clevis c-shackles, and two heavy-duty recovery straps. The heavy-duty recovery straps come in 8' and 25' lengths. This is a must-have for anyone who likes to take their ATVs or Side X Sides off the beaten path!

Models: all

Part #: 793-3219-00

CLASSIC UTV COVER

Keep your UTV clean from all the snow, dust, sap, bugs, and more. There is nothing more frustrating than having to clean your machine every time you use it. With this cover, your UTV will always be pristine. Simply remove the cover, jump on and go.

FEATURES:

  • Made of oxford cloth
  • Light duty storage cover with carrying bag
  • Reinforced tie-down grommets

Models: all single cab UTVs

Part #: 793-6003-00

Dimensions: 122" L x 64" W x 80" H

CLASSIC ALUMINUM TOP

This top is constructed with .080" thick aluminum that has been powder coated for a long-lasting finish that looks great and is extremely durable. Along each side are 3/8" thick rods to increase stability and hold up against anything thrown your way. Made here in the USA, you'll get a quality made product that is easy to install so you can enjoy your ride no matter the weather.
FEATURES:
  • Made from 12 gauge .080" thick aluminum
  • Powder-coated black for durability
  • 3/8" thick steel rod on each side add stability
  • All instructions and hardware included
  • Easy to install
  • Made in the USA

Models: 2014-Current Classic, Truck, and GC1K single cab

Part #: 793-1031-10

1.75'' UNIVERSAL MIRROR

The universal bolt-on UTV mirror's bracket allows for easy bolt-on installation without drilling.

Models: all

Part #: 693-3550-00

INTIMIDATOR FRONT BUMPER - G1

Bad Dawgs Intimidator heavy-duty front bumper is made in the USA. Our bumpers are made with American steel that is 1/8" thick and requires absolutely no drilling to fit. Black powder coated for protection as well as a great look. The bumpers also allow a winch to be mounted inside the grill and accommodates up to a 3500lb winch.

Models: 2014-2017 Classic, Crew, and Truck

Part #: 793-1005-00

INTIMIDATOR SQUARE TUBE BUMPER (G2)

The Intimidator Rear Bumper is made from solid steel and is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing.

Models: 2014-Current Classic and Crew (not GC1K)

Part #: 793-1092-00

INTIMIDATOR TOOL BOX

This toolbox is manufactured with high-grade aluminum, laser-cut, bent, and welded, in our own facility to ensure the highest quality. Designed to fit snugly in your Intimidator bed and still leave room for other items. This product is ideal for hauling around those items that would normally be slung around; fencing tools, chain saws, tool pouches, chains, etc. Easy, drop-in installation, and a few self-tapping screws, and you're ready to roll!

Models: all Classic, Crew, and Truck (not GC1K)

Part #: 793-1047-10

Dimensions: 56 1/4" L x 10 1/4" W x 15" H

INTIMIDATOR CARGO BED MAT

Protect the finish of your UTV bed with this heavy-duty rubber cargo mat.

Models: 2014-Current Classic and Crew (not GC1K or VersaBed)

Part #: 793-1015-00

INTIMIDATOR BACK/DUST PANEL

The Intimidator Back Dust Panel is made to protect you from the elements. This has a large Lexan opening for clear visibility to remove blind spots for the rider and is made from a high-quality thermoplastic material that will not fracture during cold weather. The Back Dust Panel comes with all hardware and instructions needed to make installation easy.

Notes: only compatible with Intimidator Plastic Top (793-1000-00)

Models: 2014-Current Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1012-10

INTIMIDATOR FRONT BUMPER - G2

This bumper is constructed from the highest quality steel, hand-welded in our own facility with particular attention to details. This bumper comes winch ready for up to a 4000 lb Warn Winch.

FEATURES: 
  • Easy access to the front receiver hitch
  • Easy bolt up installation
  • Made from .125" high-grade steel
  • Reinforced with .25" gussets
  • Optional bull bar shown in pictures

Notes: the bull bar is not included in the bumper price and must be ordered separate 793-1050-20

Models: 2014-2017 Classic, Crew, Diesel (not GC1K)

Part #: 793-1060-00

INTIMIDATOR BLINKER KIT (2013-2017)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:

  • Horn
  • Turn Signal Pod
  • Hardware Kit
  • Light Brackets and Grommets

Note: The pod will override the dash control for the headlight high and low beams. 

Models: 2013-2017 Intimidator Classic Series (non GC1K)

Part # 793-4076-00

INTIMIDATOR TURN SIGNAL KIT (2018-CURRENT)

Safety is always a concern when riding in a side by side. Giving other riders the ability to know your intentions, even in broad daylight, is always a safe bet. What better way to indicate what you're planning to do than adding a turn signal kit?

INCLUDES:
  • Horn
  • Turn signal pod
  • Hardware kit

Note: the pod will override the dash controls for the headlight high and low beams

Models: 2018 - Current Classic, Crew, and Truck (not GC1K)

Part #: 686-0096-00

INTIMIDATOR TILT OUT WINDSHIELD KIT

Temps are changing. Days are getting shorter. This can only mean one thing. A new season is right around the corner and if you're looking for a windshield that is made for all seasons check out the Intimidator Tilt Out Windshield.

FEATURES:

  • 1/4" thick polycarbonate
  • Hard coating on both sides of the windshield for durability and scratch resistance
  • Windshield edges are super-smooth for safety
  • Custom bend design provides maximum rigidity and strength
  • Versatile tilt mechanism for refreshing cabin ventilation: Closed and full extension
  • Extreme rigidity in each position
  • Open positions are designed for low-speed airflow only.
  • High-speed riding and trailering require the windshield to be in the FULL CLOSED position

Models: 2014 - Current Intimidator Classic, Crew, and Truck (non-GC1K models)

Part #: 793-1121-00

INTIMIDATOR HORIZONTAL LIGHT BAR SWITCH

Intimidator Horizontal Light Bar Switch

Models: all

Part # 786-3000-00

Dimensions: 1.710" L x .860" W

INTIMIDATOR DOT SAFETY GLASS WINDSHIELD W/ WIPER

Are you wanting to add some necessary accessories to your Intimidator to make it street legal? We offer the latest D.O.T. approved products to take your ride from the trails to the open road. The Safety Glass Full Front Windshield with Hand Operated Wiper by Bad Dawg Accessories is a great option and meets the Department of Transportation guidelines for taking your UTV to the streets. Get prepared for new adventures on the blacktop with this and other accessories today!

FEATURES:

  • D.O.T. stamped certified safety glass
  • Frame made from 120 gauge American steel
  • Black powder-coated frame for durability
  • Includes hand-operated wiper
  • Installation instructions and mounting hardware included
  • Made in the USA!

Notes:  Product is shipped freight. Please inspect the product carefully before signing and accepting shipment. Once the product has been signed for, we are no longer liable for damages incurred during shipping.

Models: 2014 - Current Intimidator Classic, Crew, and Truck (not GC1K models)

Part #: 793-1030-00

INTIMIDATOR 2'' BRACKET LIFT

Need a little more ground clearance? We offer a complete, bolt-on kit to give your machine a 2" lift. Made with high grade, high strength 1/4" steel. These parts are laser, precision-cut for an exact fit every time. It comes with a complete hardware kit including all the necessary bolts, nuts, and spacers.

Models: Classic, Crew, and Truck models (not GC1K)

Part #: 793-1033-00

INTIMIDATOR FRONT BUMPER - BULL BAR

If you need a little added protection for your winch and your plastic, this product is a great addition to your bumper. Easy bolt-on installation. Low cost and high quality make this addition a must-have!

Notes: this is the bull bar only, bumper sold separately. It works on the Intimidator Front Bumper (G2) (793-1060-00

Models: Classic, Crew, Truck (not GC1K)

Part #: 793-1050-20

INTIMIDATOR REAR BUMPER (TUBE STYLE)

The Intimidator Rear Bumper is made from solid steel and is a must-have to protect your UTV while putting it through rough terrain. The bumper is powder-coated black and comes with all necessary hardware and instructions for installing.

Models: 2014-Current Classic and Crew series (not Truck, VersaBed or GC1K)

Parts #: 793-1003-00

2018 INTIMIDATOR SHEET METAL BUMPER

This bumper, as with all our products, is constructed from the highest quality steel, hand-welded in our own facility with particular attention to details. This bumper comes winch ready for up to a 4000lb Warn Winch.

FEATURES:

  • Easy access to the front receiver hitch
  • Easy bolt up installation
  • Made from .125" high-grade steel
  • Reinforced with .25" gussets

Notes: the bull bar is not included in the bumper price and must be ordered separate 793-1050-20

Models: 2018-Current Intimidator Classic and Crew

Part # 793-1105-00

Dimensions: 58" L x 25" W x 9" H

INTIMIDATOR FRONT WINDSHIELD - LEXAN

Putting a windshield on your UTV is a great investment. Being free of dust, bugs, and flying debris will make your riding a lot more enjoyable, not to mention drier in the rain. Who wouldn't enjoy more comfortable rides in their UTV? With Bad Dawgs easy installation, you can have your new windshield on and going in no time and all the hardware you need is included.

This Lexan windshield is 1/4" thick and has a sliding vent at the bottom to adjust your airflow on those warmer days. The scratch-resistant material for this windshield is made in the USA and will provide you and your riders with clear and protected riding enjoyment. Made specifically for the Intimidator, it's a precise fit every time.

FEATURES:
  • Made from 1/4" thick Lexan polycarbonate
  • Sliding vents for adjustable airflow
  • Scratch-resistant material
  • Quick, easy installation
  • Protect you and your riders from the elements
  • Made in the USA

Models: 2014-2018 Classic, Crew, and Truck (not GC1Ks)

Part #: 793-1002-10

FRONT FOLDING LEXAN WINDSHIELD

Rain, snow, or sunshine, you've got a lot of work around the farm regardless and the Intimidator is your right hand. When you have to go out and do chores, you want to ride without the harsh wind or cold rain in your face. Bad Dawg’s Full Folding Front Windshield gives you the option of blocking the bad weather or folding it down to enjoy the fresh breeze of a nice day. Outfit your machine today with this accessory and make those outside chores a little less dreadful.

This windshield offers the flexibility to choose between a full or half windshield in one by having a clear folding strip that connects the two pieces of the windshield. The bottom gasket will contour the hood of your side by side to protect the body and seal the edges. The hood compartment is fully accessible because the windshield doesn’t block it at any point when installed. All hardware and instructions are included for a quick and easy installation.

FEATURES:

  • Made from 1/4" thick polycarbonate
  • Clear strip at fold doesn't interfere with the view
  • Two windshields in one
  • Bottom gasket protects the body of the machine
  • Hood compartment completely accessible
  • Includes all hardware and instructions
  • Easy installation
  • Made in the USA

Notes: 2014-201818 Intimidator Classic, Crew Cab, and Truck Series

Models: 2014-2018 Intimidator Classic, Crew, and Truck (not GC1K)

Part #: 793-1040-10

INTIMIDATOR CLASSIC ARMORTECH CAB

This cab enclosure system comes complete with doors, roof, back, and front. This high-quality system is made in the USA.
FEATURES:
  • All steel construction
  • Fold-down tempered glass windshield
  • Rear sliding glass window
  • Roof edge is uttered to keep you dry
  • Doors have plexiglass upper windows & glass lower
  • All hardware necessary for mounting is included
  • Vortex coated for durability
  • Installs in minutes

Notes: manual wiper (793-1082-10) and XL rearview mirror (793-1082-30) sold separately

Models: 2014-Current Classic

Part #: 793-1085-00

INTIMIDATOR HALF DOORS

Looking for half doors that not only have a great look but is built to withstand some of the worst conditions? Bad Dawg has set the bar even higher with their Intimidator Half Doors. These half doors are made from solid American steel and with the black powder coat finish, they are like no other.

FEATURES: 
  • Made in Batesville, AR
  • Constructed from American steel
  • Laser-cut and welded for a great look, great finish, and durable construction
  • Powder-coated texture black for superior protection and a long-lasting finish

Note: sold as a pair

Models: Classic and Truck (not GC1K)

Part #: 793-3221-00

INTIMIDATOR NERF BARS

Intimidator Nerf Bars are made from solid steel and are a must-have to protect your UTV while putting it through rough terrain. They are black powder coated and come with all the necessary hardware and instructions for installing. Protect your machine with these solid steel, round tubing nerf bars that will give your ride not only a great look but added protection from rocks, trees, and trail debris.

Models: 2014-Current Classic series

Part #: 793-1008-00

ELECTRIC UNIT WINCH INSTALLATION KIT